Télécharger Imprimer la page

3M Performance Spray Gun Manuel Du Propriétaire page 3

EU Declaration of Conformity
Company
3M Company
Address
3M Center, Building 223-6N-01
St Paul, MN USA 55144-1000
Does hereby declare under our sole responsibility that this equipment or product(s) comply with the applicable
essential requirements of the legislation listed below; along with the referenced standards or specifications.
Object - Product name and/or model number(s) and/or unique identification:

"Performance Spray Gun"
Type and/or description and/or intended purpose or equipment class and/or
particular conditions applicable to the use of the Object:
Part numbers: 26978, 26878, 26778, 26832, and all kit products which include
these part numbers
Serial number or range (if applicable):
"20ab"–to–"2099", where "ab" is any 2-digit number.
Year of manufacture:
Conforms to the following Union harmonization legislation; together with all amendments to-date:
Directives:
Machinery Directive 2006/42/EC, ATEX Directive, 2014/34/EU
Standards / specifications / provisions complied with; in full or in part as applicable:
EN ISO 12100:2010
EN 1953:2013
EN 14462:2005+A1:2009
EN ISO 80079-36:2016
II 2G Ex h IIB T4
Signature
Name of Signer
Stacee L. Royce
Person authorized to compile the technical file, established in the Community
Name and Title
Florent Gumery, Director Sce Tech.,
AAD Reg & Ctry Application Engineering
Division
Automotive Aftermarket Division
Safety of machinery. General principles for design. Risk assessment and risk
reduction
Atomizing and spraying equipment for coating materials. Safety requirements
Surface treatment equipment. Noise test code for surface treatment
equipment including its ancillary handling equipment. Accuracy grades 2 and 3
Explosive atmospheres - Part 36: Non-electrical equipment for explosive
atmospheres - Basic method and requirements
Date
Title
Vice President and Technical Director
Address
3M Beauchamp France, 1 Avenue Boule, Parc Barrachin,
Beauchamp Val-d'Oise, 95250, France +33-130402581
ORIGINAL
1
Illustration - Typical
Place
St. Paul, Minnesota USA
loading