Troubleshooting - Avanti Rm16J Serie Manuel D'instructions

Table des Matières
Les langues disponibles

Les langues disponibles

PROBLEM
Unit does not operate.
Tums on and off frequently.
Vibrations.
The unit seems to make too
much noise.
The door will not close
properly.

TROUBLESHOOTING

POSSIBLE CAUSE
Not plugged in.
The circuit breaker tripped or a blown fuse.
The unit temperature control is set at "O" position.
The room temperature is hotter than normal.
A large amount of food has been added to the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The unit does not have the correct clearances.
Check to assure that the unit is level.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your unit.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The unit is not level.
The unit is not level.
The door was reversed and not properly installed.
The gasket is dirty or bent.
The shelves, bins, or baskets are out of position.
English - 9
Table des Matières
loading

Table des Matières