Vestfrost AKG/S 337 Mode D'emploi page 23

12. Remount the top panel with 4 screws at
the top op the panel...
13. .. and the 2 screws below the panel.
14. Refit the lock housing and lock pin.
15. After reversing the door, it is important
to check that the sealing strip provides
a tight seal all the way round. If it does
not, carefully heat the strip all the way
round using a hair dryer. Then ease the
strip outwards slightly so that it forms a
tight seal against the cabinet. Be care-
ful not to heat the strip so much that it
melts!
23
GB