EINHELL GE-PP 36 RB-A Li Instructions D'origine page 15

3. Suspension eye
4. Power cable
5. Intake cage
6. Battery box
7. On/Off switch
8. Battery cover
9. Locking hook
10. Fastening hook
11. Extension tube (long)
12. Extension tube (short)
13. Telescopic tube with attachment hook
14. Swiveling connection with stopcock
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless rain barrel pump
•
Fastening hook
•
Set of tubes
•
Original operating instructions
3. Proper use
The equipment you have purchased is designed
to pump water with a maximum temperature of
35 °C. This equipment must never be used for
other liquids, especially not for engine fuels,
cleaning agents and other chemically-based
products!
Anl_GE_PP_36_RB-A_Li_SPK13.indb 15 Anl_GE_PP_36_RB-A_Li_SPK13.indb 15
EN
The equipment can be used wherever you want to
move water, e.g. in the house, in the garden, and
for many other applications. It must not be used to
operate swimming pools!
If you want to use the equipment in bodies of wa-
ter with a natural, muddy bottom, place the equip-
ment in a slightly elevated position, e.g. on bricks.
The equipment is not designed for continuous
operation, e.g. as a circulating pump in a pond. In
this case the equipment's anticipated life will be
greatly shortened because the equipment was
not designed for continuous loading.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The water may be contaminated by escaping lub-
ricating oil/lubricant.
4. Technical data
Voltage ....................................................36 V d.c.
Max. pumping rate ..................................4500 l/h
Delivery head maximum ............................. 30 m
Max. delivery pressure ...........0.30 MPa (3.0 bar)
Max. immersion depth ................................... 4 m
Water temperature maximum ...................... 35°C
Hose
connection ......approx. 33.3 mm (1") male thread
Max. size of foreign bodies: .............. Clean water
Suction height .......................min. approx. 10 mm
Minimum water level when starting up ..... 25 mm
Type of protection of pump: ..........................IPX8
Type of protection of battery box: .................IPX4
Using the pump with the set of tubes
Max. pumping rate .................................1,900 l/h
Delivery head maximum ............................. 30 m
Max. delivery pressure ...........0.30 MPa (3.0 bar)
- 15 -
09.12.2025 12:55:14 09.12.2025 12:55:14