Guitar Amp - AKG Emotion D 440 Mode D'emploi

Loudspeakers radiate high frequencies within a
very narrow angle.
Place the microphone about 2 to 6 inches in front
of the loudspeaker diaphragm and aim the micro-
phone at the center of the diaphragm.
1. To prevent the top head from ringing excessively,
tape a strip of felt or a piece of tissue paper to the
skin in an off-center position.
2. Screw the supplied H 440 bracket to the stand
adapter on the microphone using the captive
knurled-head screw on the H 440 bracket.
3 Using Your Microphone

3.3 Guitar Amp

Fig. 6: Microphone
placement for a
guitar amp.
3.4 Tom-toms,
Snare Drum
Fig. 7: Mounting
the microphone on
a tom-tom.
19