AKG EMOTION D 880 Mode D'emploi page 15

Fig. 3: Using a balanced connecting cable.
1. To connect the microphone to an unbalanced
microphone input (1/4" jack), use a cable with a
female XLR connector and a 1/4" TS jack plug.
These cables are available at music stores.
Please note that unbalanced cables may pick
up interference from stray magnetic fields near
power or lighting cables, electric motors, etc.
like an antenna. This may cause hum or similar
noise when you use a cable that is longer than
16 feet (5 m).
2 Wiring
2.3 Connecting
the Microphone
to an
Unbalanced
Input
Fig. 4: Using an
unbalanced cable.
15