Safety Notes; Important Notes; Functions - Minitrix 120 Serie Mode D'emploi

Safety Notes

• This locomotive is to be used only with an operating
system designed for it.
• The wire used for feeder connections to the track may
only be a maximum of 2 meters / 78 inches long.
• Analog 14 volts DC, digital 19 volts AC.
• WARNING! Sharp edges and points required for operation.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or
spare parts.
• Disposing: www.maerklin.com/en/imprint.html
• The firm Gebr. Märklin & Cie. GmbH grants a voluntary
manufacturer's guarantee of 24 months for this product
from the purchase date (maximum of 60 months from
appearance in the catalog) from an authorized Märklin
specialty dealer. This is independent of the legal warranty
claims for the purchase of this product according to the
conditions at www.maerklin.de/garantie.

Functions

• Trix locomotives can be operated on all 2-rail DC systems
with conventional DC power packs.
• An electronic overload protection is build in to protect the
model.
• Triple headlights in the front, dual red marker lights in the
rear, that change over with the direction of travel.
• Trix motor vehicles must not be operated on digital
systems without an built in engine decoder (Motor can be
damaged!).
• Based on the NEM 661 standard, the speed of the loco-
motive at 12 volts is set approximately at the maximum
speed for the prototype.
• NEM close coupler mechanism and coupler pocket.
• Locomotive with a 14-pin digital connector.
• The light function can be changed by plugging
the bridge plug in the opposite way.
WS-WS Triple headlights in the front
LV+LR headlight changeover front and rear
LV headlight changeover only front
LR headlight changeover only rear
7