HOMCOM 800-265V90 Mode D'emploi page 5

EN
Overheating safeguard
The jug kettle is fitted with an overheating safeguard. This will switch off the jug kettle if it
is operated without (sufficient) water. Allow the jug kettle to cool down for at least 10
minutes before using it again.
CLEANING AND MAINTENANCE
Remove the plug from the wall socket, and allow the appliance to cool.
•
Clean the jug with a damp cloth. Never immerse the appliance in water. Never put the
•
appliance in a dishwasher. Make sure that the electrical connections do not become
damp.
If the interior of the jug has become severely discoloured, then the best way to clean it
•
is with a damp cloth and a little washing soda. After cleaning, rinse the jug very
thoroughly.
ATTENTION:
• Never use corrosive or scouring cleaning agents or sharp objects (such as
knives or hard brushes) to clean the appliance.
• Before cleaning, make sure that the appliance is not connected to the power
supply and that it has cooled down.
DESCALING DESCALING
This appliance is equipped with an integral heating element, and consequently
•
limescale will not be formed. Consequently you do not need to descaled the appliance.
However, if you nevertheless do wish to descale the appliance:
•
1. Remove the plug from the wall socket, and allow the appliance to cool.
2. The jug kettle is fitted with a descaling filter. This filter must be removed for cleaning.
3. Fill the jug with a vinegar solution to the MAX level, and bring to the boil.
4. Leave the jug with the vinegar solution to stand for a couple of hours.
5. Empty the jug, fill with clean water to the MAX level, and bring to the boil. Empty the
jug. Repeat this process twice.
Never use ammonia or other products to descale the appliance. These can be
•
injurious to your health. Use solely a vinegar solution, or special descaling
agents available from retailers.
SPECIFICATION
Product: Cordless kettle
Model: 800-265V90
Power consumption: 1850-2200W
Voltage:220V-240V 50-60Hz
Made In China
~
5