Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use of the product
Please follow the following step to install the use product
Squeeze juice
1.Connect the feeeding tube with the main ware.
2.Push the hexagonalscrew into master ware's hole,boost to the end
·Move screw a little bit when it can not get inside well.
3. Connect the feeding tube lid with feeding tube
1) stagger the clips of tube lid with feeding tube, then push it.
2) Rotate it counterclockwise until seized, if failed, the feeding tube lid will drop when begin to
work.
4. Prepare two Measure cups, one for juice and another for pomace
5. Put the Tray into the top of Feeding Tube
The tray will help to add food easily, especially for granules fruit
Like : Grape ,strawberry...etc.
6. 1) Insert the Plug
2) Push" On/Off" button,, it begin to work. it will stop automatically
7. Clean the food and chop the suitable size to the feeding tube and put them into the tray
1)Push three clips of feeding tube into clip notch on the mainware；
2)Then turnit contrarotate,when heard "click" it means connected well and right.
after running for 20mins.Repush the button, if you want to cease it.
for later use.
Please cut the spinach into small pieces before squeezing and
control the speed of adding new spinach properly.
Publicité
Table des Matières
