Duplication Of Product Configuration Parameters - Adeunis RF ARF50 Notice D'emploi

• Disconnect the configured product.
• Reproduce steps 3 and 4 for all the products comprising the system.
• When all the modules have been configured => a green icon is displayed (1)
under the name of the mode and a dialogue box opens with the message « system is ready to use » (2)
1
5.3.4.05
• In the case of a multi-product system, it is possible to reproduce the product configuration of a previously
configured product (1). This option is automatically proposed at the end of configuration. Tick those whose
configuration you wish to reproduce (2).
• This option is active for each product with a new configuration provided that all the products have been confi-
gured.
• Disconnect the configured product.
• Then proceed normally to step 3 then 4 but only entering the serial number.
208009A-V1.3-UG_ARF50
2

Duplication of product configuration parameters

2
(≠ red: NOK – system error)
1
44