Chaining I/O Modules To Expand The Number Of I/Os; Connecting An I/O Module To The Configuration Ihm; Connecting An I/O Module To The Supervision Ihm; Configuring The Arf50 - Configuration Of The Communication Mode - Adeunis RF ARF50 Notice D'emploi

4.3.4 Chaining I/O modules to expand the number of I/Os

Via the proprietary port (named CAN)
Depending on the power supply used and the number d'I/O expansion in the system, the distances given in the
table below can be covered.
Number of I/O
expansion
16
8
4
2

4.3.5 Connecting an I/O module to the configuration IHM

Via the USB interface

4.3.6 Connecting an I/O module to the supervision IHM

Via the RS485#2 interface
5. Configuring the ARF50 – Configuration of the communication mode
5.1.

General

Configuring the ARF50 requires the prior installation of the ADEUNIS RF configurer.
This software can be found on the Adeunis RF web site.
The configurer is software that:
• Configures the ARF50 (choice of mode, parameters of the RS485 and proprietary port communication inter-
faces, selection of the direction of working of the I/O)
• Displays the current configuration of an ARF50
• Enables backup of a complete system
• Recalls an existing system configuration for the downloader in new products in the case of a new system or
for maintenance purposes (replacing a faulty product)
5.2. Installation – Removal
The configuration software operates under Windows XP SP3 and more recent versions.
Before installing the configuration software, make sure you have the following installed on your computer:
• .NET Framework 4.0
• Windows Installer 3.1
• CP210x USB to UART UCP DRIVERS
If you don't have it, download it.
Installation: start «ARF50_configuration_manager.msi»
Uninstall the programme using Windows control panel: Add / Remove programmes.
Note: System configuration files created by the user are not deleted during uninstallation. They will still be acces-
sible in the installation directory. By default: c:\Program files\Adeunis-RF\ARF50 Configuration manager\ARF50
system saved.
They will be added automatically when the software is next installed.
208009A-V1.3-UG_ARF50
Alimentation Alimentation
under 12Vdc under 24Vdc
2m 40m
4m 80m
8m 120m
16m 160m
36