Glossary; Introduction - Adeunis RF ARF50 Notice D'emploi

1. Foreword
This guide describes the functions, options and accessories of the ARF50 I/O module.
No extract from this document may be reproduced or transmitted (in electronic or paper format, or by photocopy)
without the agreement of Adeunis RF.
This document may be modified without notice.
All brand names mentioned in this guide are subject to intellectual property rights.
Adeunis RF
283, rue Louis Néel - 38920 Crolles – France
Website: www.adeunis-rf.com
Telephone: +33 (0) 4 76 92 07 77
Fax: +33 (0) 4 76 08 97 46
Email: arf@adeunis-rf.com

2. Glossary

I/O
Master
I/O expansion
RF slave
TOR
SCADA
IHM
Vih
Vil

3. Introduction

The ARF50 is an I/O module that can acquire the states of sensors, contacts or counters in order to control remote
equipment by means of digital or analog information.
It can be associated with a ADEUNIS RF radio modem to establish a wireless link between 2 remote units where
a wired connection is not practical.
Configuration is by means of the dedicated software (ADEUNIS RF configurer) and so no programming knowledge
is required.
208009A-V1.3-UG_ARF50
Input / Output
Master ARF50
Expansion I/O: expansion module for number of
master I/Os
Slave radio module
Digital
Supervisory control & data acquisition (tremote moni-
toring and acquisition of data)
Man-machine interface (sensor, counter, automated
system, etc.)
input high voltage
input low voltage
31