Multibrackets M Universal Long Reach Manuel D'installation page 7

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the
TV to slide horizontally
the wall. This feature allows the TV to be placed at an optimal position, regardless of the
position of the wall studs. The mount will ship with the locking bars installed in place at their
center position. If the sliding function will be used, take off the locking plates by removing the
bolts that hold them in place. Place the top locking bar at the desired position to fix the left
slide limit of the arms and place the bottom bar at the desired position to fix the right side
limit of the arms. The raised metal piece at the end of the locking bars limit the slide of the
arms. Ensure the locking bars are oriented correctly to ensure both the left and right side
locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking
bar's position to prevent the arms from sliding off the wall plate. WARNING:
INSTALL THE LOCKING
FROM SLIDING
Take Off
left or right for up to 15.7 inches, while the wall plate is stationary on
BARS ADEQUATELY
OFF THE WALL PLATE.
www.multibrackets.com
MAY RESULT IN THE ARMS
FAILURE TO
AND THE TV
7