Philips OneUp XV5113 Mode D'emploi page 9

1×
2×
Wetness setting 1: One indicator lights up for normal daily cleaning. The appliance will
1×
always start at this setting when switched off.
Wetness setting 2: Two indicators light up for a wetter cleaning to remove stains on the
2×
floor.
7 For optimal results, rinse the pad under the tap with the fabric side facing
upward.
Note: Do not wring the pad after rinsing.
8 Place the pad on the floor and firmly press the nozzle onto the water
connector interface of the pad.
9 Press the On/Off button to switch On the appliance. The battery level
indicator lights up.
10 Press the wetness setting button to choose between two settings:
English
9