Cable Routing And Connection; How To Use It; Calling - Depaepe Telecom SecurPhone IP Notice D'utilisation

SecurPhone IP – User Guide

2.3. Cable routing and connection

To improve the protection against humidity and bad weather :
- drill the cable(s) holes a slightly thinner dimension than the
diameter of the cable itself.
- bend the cable downwards to let the water and humidity run
outside of the case.
Passe-câble / Rubber
cap
Paroi de l'appareil
Housing surface
Cases come out of factory with pre drilled holes to ensure proper
ventilation. Do not fill those holes.

3. How to use it

3.1. Calling

Hook-off the handset in order to pick up the line:
1) If your SecurPhone IP has a front panel keypad, then dial the number. To send the
call, press # key or wait for 4 sec. (no key entry time out is default value, you can
change it).
2) If your SecurPhone IP has memory buttons, press a button and the phone will dial
one programmed number (once the unit has been configured, see §4.7 Memory
storing p 36).
Intérieur/Inside
Câble / Cable
Bon/Correct
Extérieur/Outside
Intérieur/Inside
Extérieur/Outside
Mauvais/Wrong
30