Description of control mode switchover
Mode 1: remote control.
In this mode, only adults can use the remote control to control the
forward, backward and steering of the product, and the foot switch
cannot control the product.
Mode 2: manual control.
In this mode, the forward, backward and steering functions of the
product can only be operated by the children themselves. Select the
forward or backward gear, step on the foot switch, control the product
forward or backward, and manually operate the steering wheel to
control the steering.
Operation method of mode switching:
Find the mode switch under the seat, It has a transparent lid and is
locked with a screw, requiring parents to open it with a screwdriver, tur
the switch to gear "r c" for remote control mode, and turn the switch to
gear "manual" for manual control mode.
08
Remote Control Function and Instructions
Never switch forward and backward operations when the car is
moving, otherwise the gearbox and motor will be damaged.
Only the baby's legal guardian can use the remote control.
The product is operated mainly by the remote control.
The remote control is already completed the verification of the code
when it leaves the factory, and can be used directly with the battery
added!
If the remote control cannot be used, try the following steps:
Step 1: Turn off the power switch
on the vehicle.
Step 2: Hold down Forward &
Backward button for 3 seconds
start match code, the first LED
flicker.
Step 3: Turn on the car's power
now, the first LED lit up, match
code success.
If the remote control does not run for 10 seconds, it will be in standby
mode. Press any key to wake up.
Press the "P" button to brake, all LED flicker, and other button
functions fail; Press "P" again to release the brake and restore other
button functions.
Stop
Speed
Forward
Backward
Left Right
Indicator Light
09