Control Operation - Panasonic Wv-Ck1420A Manuel D'instructions

ADVANCED CONTROL
o Displaying the Setup Display
I. Turn on the Power Switch
2. Press the MENU button, the setup display shown below appears on the monitor screen.
It will disappear automatically when no operation takes place for about 3 seconds.
BRIG BT
CONTRAST
PICTURE
COLOR
TINT
MONITOR RESET
LANGUAGE
o Adjustment
3. Move the cursor to LANGUAGE by pressing the MENU button.
4. Select the desired LANGUAGE parameter by pressing the LEVEL (—)or (+) buttons, Pressing the buttons will toggle the setup
display in selected language as shown below.
FRANGAIS
ENG
5. Move the cursor to BRIGHT, CONTRAST, PICTURE, COLOR or TINT by pressing the MENU button, then adjust the level of the
selected item by pressing the LEVEL (—)or (+) buttons.
While adjusting the selected item level, the display changes to the indicator as shown below.
item
BRIGHT
CONTRAST
PICTURE
COLOR
TINT
6. To reset the monitor to the default settings, move the cursor to MONITOR RESET by pressing the MENU button. Then press the
LEVEL (+) button to return to the factory default settings.
BRIGHT
CONTRAST
PICTURE
COLOR
TINT
LANGUAGE
7. To exit the setup display, press the MENU button repeatedly until the cursor is passed over MONITOR RESET or wait for about
3 seconds until it disappears.
OPERATION
of the Monitor.
ENGLISH
-Q— ESPANOL
LEVEL+
LEVEL-
Effect
Darter Bri$lter
Less More
Soft Sharp
Less More
Greenish Reddish
ENGLISH
Indicator
32
BRIGHT
32
CONTRAST
32
PICTURE
32
COLOR
TINT
BRIG BT
CONTRAST
PICTURE
COLOR
TINT
LEVEL*
MONITOR
LANGUAGE
-3-
RESET
ENGLISH