DS Produkte HOME SHADOWS HFRPO0308 Mode D'emploi page 27

Problem
The blue status
LEDs (2) are
blinking.
Visit www.homeshadows.com for more helpful information.
04440_DE-EN-FR-NL_A6_V1_1.indb 27
27
Possible cause
Blink interval of
10/90%: the device
is overheated.
Blink interval of
50/50%: The device
has become too hot
since the switch (5)
was last used, or it
is trying to reduce
the brightness to
cool itself down.
Remedying
Check whether the
air vents are dirty or
covered. The device
will be ready for use
once it has cooled
down.
Check whether the
air vents are dirty or
covered.
If the device is no
longer overheated,
it will return to this
mode after the
switch (5) has been
activated.
Make sure that
there is enough
space around the
device.
EN
29.07.2019 10:19:12