Télécharger Imprimer la page

Extreme Max 3005.3865 Instructions D'installation

Les langues disponibles

Les langues disponibles

Liens rapides

-naäuC7$
Includes:
I. Spare Tire Bracket x I
2. Retainer
Bracket
x 2
3.
MIO
Hex Head
Bolt
x 4
4. MIO
Washer
x 4
5. MIO
Lock
Nut
x 4
6.
MI 2 Carriage Bolt x 2
7.
12mm Lug Nutx2
5
Read,
Follow,
and Save These
Caution:
• Secure spare tire with safety cord, cable or chain.
•Trailer
frame
must support
carrier and tire will not vibrate
trailer.
• Be aware of potential
hazards when choosing
o Front /Tongue
Mount: Maintain clearance between the spare tire and the vehicle's bumper. There should still be
learance when the vehicle turns sharply. Step bumper hitches and bumpers can hit the tire and cause undue stress on
the bracket welds. It is important to ensure that even at sharp turn angles the tire and vehicle bumper do not contact.
o Mid-Trailer/
Side Channel Mount: Allow sufficient
conditions,
or in instances of hazards, such as curbs and potholes.
Product
Satisfaction
At Extreme Max, we pride ourselves
not 100% satisfied
with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product is warranted
for consumer
Warranty
valid only in the USA.
This product is warranted
to the original
wear and tear expected.
This warranty
of goods or any acts of vandalism
commercial
use. The sole remedy under this warranty
or similar product, or the refund of the original
or incidental
damages.
Any and all freight charges to handle warranty
Extreme MaxTM is not responsible
For all inquries please send your name, mailing
summary
of alleged defect and any applicable
Customer Service: service@extrememax.com
Installation
6
4
3
2
Instructions.
the additional
weight
of the spare tire and the mount
during travel, even at high speeds. Improper
a location
Guarantee
on making quality
use for 2 years after the date of retail purchase. Warranty
retail purchaser to be free from defects in material
shall not apply to any defects caused by: (l) overloading,
by any person, (III) improper
is at the discretion
purchase price. Extreme MaxTM is not responsible
for any labor charges that may be incurred.
address, main contact
pictures to service@extrememax.com.
Spare Tire Bracket
Instructions
1
installation
to mount the spare tire carrier.
ground
clearance for the tire to clear the ground
products
and wish to correct any mistakes on our end. If you are
installation
or use contrary
of manufacturer:
claims are the responsibility
phone number,
I www.extrememax.com
3005.3865
7
during
travel.
A properly
mounted
can cause damage to the unit or
in poor road
includes
parts only.
and workmanship,
ordinary
(II) physical abuse
to the instructions,
(IV)
the replacement
of the same
for any consequential
of the consumer.
original
retail sales receipt,
3399ex0120
loading

Sommaire des Matières pour Extreme Max 3005.3865

  • Page 1 Product Satisfaction Guarantee At Extreme Max, we pride ourselves on making quality products and wish to correct any mistakes on our end. If you are not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
  • Page 2 Installation Instructions 1. Decide a location along the trailer frame for the spare tire carrier. Place the spare tire bracket against the trailer frame at this location, positioning the topmost mounting holes just above the top of the trailer frame. 2.
  • Page 3 Garantie De Satisfaction Du Produit Chez Extreme Max, nous sommes fiers de fabriquer des produits de qualité et souhaitons corriger toute erreur de notre part.
  • Page 4 Instructions D'installation 1. Choisissez un emplacement le long du chåssis de la remorque pour le support de roue de secours. Placez le support de roue de secours contre le chässis de la remorque cet endroit, en positionnant les trous de montage les plus hauts juste au-dessus du haut du chåssis de la remorque.