Extreme Max 3005.3878 Instructions De Montage

-naäuC7$
Includes:
1. Pontoon Fender Hanger x 1
2. Quick Release Pin x 1
3. Pivot Lock
Read, Follow, and Save These
Instructions.
Warnings:
• Use for intended purpose
• Do not use to support more
of the boat fender
• Contains removable parts
• Use caution when installing
For use with fender lines up to 1/2" diameter.
Installation Instructions
Read all information included
1. Pull the Quick Release Pin from the body of the fender hanger.
2. Attach the Locking Fender Hanger to the rail of your pontoon
Pivot Lock is in the open position.
3. Once you have the bracket attached, return the Pivot Lock to the closed position
Pin back into place.
4. Insert fender line up through
to hold the fender at the desired height.
Product Satisfaction
At Extreme Max, we pride ourselves
not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product is warranted for consumer
Warranty valid only in the USA.
This product is warranted to the original
wear and tear expected. This warranty
of goods or any acts of vandalism
commercial use. The sole remedy under this warranty
or similar product, or the refund of the original
incidental damages. Any and all freight charges to handle warranty
MaxTM is not responsible for any labor charges that may be incurred.
For all inquries please send your
summary of alleged defect and any applicable
Customer Service: service@extrememax.com
Locking
only
than the weight
over water
on this page before beginning
the opening in the top of the Fender Hanger. Tie a knot above the fender hanger
Guarantee
on making quality
use for 2 years after the date of retail purchase. Warranty
retail purchaser to be free from defects in material
shall not apply to any defects caused by: (l) overloading,
by any person, (Ill) improper
purchase price. Extreme MaxTM is not responsible
name, mailing address,
pictures to service@extrememax.com.
Fender Hanger
Instructions
1
operation or installation.
with the fender line hole facing out. Ensure the
products and wish to correct any mistakes on our end. If you are
installation or use contrary
is at the discretion of manufacturer:
claims are the responsibility
main contact phone number,
I www.extrememax.com
Installation
3005.3878 (Each)
3005.3878.4 (4-Pack)
3
and insert the Quick Release
includes parts only.
and workmanship, ordinary
(II) physical abuse
to the instructions, (IV)
the replacement of the same
for any consequential
of the consumer.
original retail sales receipt,
2
or
Extreme
3518ex0121