Extreme Max 3005.3868 Instructions D'installation

-naäuC7$
Includes:
ITEM NO. PART NUMBER
3868-100
2 3868-200
3 3868-006
4 91287A394
93625A400
5
6 93475A290
97248A314
7
8 93625A250
7
Warnings:
• Secure the spare tire with a safety cord, cable, or chain.
• The trailer frame must support
mounted carrier and tire will not vibrate
the unit or trailer.
• Be aware of potential hazards when choosing
o Maintain clearance between
vehicle turns sharply.
and trailer. It is important
o Allow sufficient
hazards, such as curbs or potholes.
• Overloading the trailer frame
personal injury or property
weight.
• Inspect the tire carrier and hardware
any missing components
Customer Service: service@extrememax.com
Angle Iron Spare Tire Carrier
Installation
DESCRIPTION
Tire Bracket
Angle Iron Mount Weldment
Retainer Plate
M12x 1.75 x 50MM Hex
M12 Lock Nut
M 12 Washer
M6 Carriage Bolt
M6 Lock Nut
8
3
2
6
the additional weight
during travel, even at high speeds. Improper
a location to mount the spare tire carrier.
the spare tire carrier and the vehicle's
Step bumper hitches and bumpers
to ensure that even at sharp turn angles the tire and vehicle
ground clearance for the tire to clear the ground
may decrease trailer frame
damage. Verify that your trailer frame will withstand
before each use to ensure a secure hold. Tighten
before the next use.
Instructions
QTY.
Head Bolt 3
2
5
4
of the spare tire carrier and the mount during
bumper. There should be clearance when the
can hit the tire and cause undue stress on the carrier
in poor road conditions,
integrity, resulting in a serious driving
I www.extrememax.com
3005.3868
1
5
6
6
travel. A properly
installation may cause damage to
bumper do not contact.
and in instances
hazard, and possible
the stress of high-speed travel and tire
any loose hardware
of
and replace
3518ex0121