Cleaning And Maintenance - Carmen COMPLETE STYLE 1000 Mode D'emploi

• There is always risk of injury when using electrical appliances
improperly!
• To prevent unintentional misuse, keep the appliance stored
away in a safe place.
Operating Instructions
Accessories
• 38 mm Jumbo brush
• 20 mm Combi brush
• Removable styling comb
• Blower nozzle
Attachments can be removed by pressing on the front button
marked <push>. When the two arrows (<) line up, the accessory
is properly attached. To remove the attachment press <push>,
twist the hair dryer until < is located against 0, then remove the
attachment. To fit an attachment the appliance should be rotated
in the opposite direction until < is against 0. Then twist further
until < is against <.
Operation
Towel dry the hair after washing.
Round brush with metal bristles, 20 mm diameter.
Brush the hair thoroughly from the roots to the ends. Working
from the ends, twist the hair into a curl, switch on the dryer
(position 1 or 2) and allow the warm air to play through the hair
until it is dry. Then press on COLD AIR and cool the dry curl.
Styling comb
The styling comb allows long hair to be carefully combed smooth
with the use of warm air. With short hair the styling comb can be
used for styling and modelling.
Wave head
The wave head focuses the warm air on a small section of hair.
Switch
0 = appliance is switched off
1 = 500 watts, less powerful air
2 = 1000 watts, more powerful air
Care program
Pushing the pink switch forward into the CARE position
programs the dryer to style and dry your hair at "hair friendly"
temperatures with either of the two positions of the main switch.
Sliding the pink switch back to its previous position switches off
the CARE program and the dryer will operate at full power.
CARE button
Pushing in the CARE button allows the hair to cool. Regardless of
the switch position, the temperature of the air will be reduced
as long as the CARE button is held in (useful for example when
cooling off a curl or styled hair).

Cleaning and maintenance

Remove the plug from the socket before cleaning the appliance.
Never immerse the appliance in water. Ensure that the appliance
does not become dirty. Clean the air inlet regularly with a soft
brush. Clean the appliance with a damp cloth and dry it with a
soft cloth. Remove any accessories and clean these also.