Direction For Use; Hints And Tips - Carmen 3-in-1 Pro Curler Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
6 • ENGLISH
• Using a hairspray can cause burns when the spray
comes in contact with the barrel.
• Never hold the device by or near the barrel when the
device is switched on. The barrel can cause burns. Avoid
all contact with your skin, eyes and ears.
• Never unplug the barrel from the handle when it is hot.
> DIRECTION FOR USE
IMPORTANT: THIS IS A HIGH TEMPERATURE PRODUCT
1. Select the desired barrel to use.
2. Insert the barrel into handle, ensuring the flat edges
line up. The barrel should lock into place by the internal
magnets.
3. Plug the device in and hold the on/off button for 3
seconds to turn it on.
4. The display will be flashing. Use the + or – buttons to
set the desired temperature. After a few seconds the set
temperature will automatically lock; this will be evident
by the lock symbol being displayed.
5. Once the set temperature has been reached, the display
will stop flashing and the curler is ready to use.
6. To change the temperature again, press and hold the
Timer/Lock button until the lock symbol disappears.
7. Hair should be clean and dry when using the styler. While
styling, section the hair into strands of 5 to 6 cm wide
in one row. Keep the hair strand smooth by brushing or
combing through the section (from scalp to hair ends)
while holding the ends taut with the other hand.
8. Take one strand at a time, wrap the hair around the
barrel downward and wait for around 8 seconds. Now
gently withdraw the barrels from the center of the curl.
Allow the curl to cool and try not to disturb curls while
proceeding in the same manner around the whole head.
Be careful the hot barrel not to touch the scalp or ears.
9. After styling the first section, you should be careful with
sliding the barrel along the and you must move from one
section to another section.
> HINTS AND TIPS
• Hair should be completely dry to achieve the best result.
• Keep the strands of hair smooth whilst you work to avoid
ridges half way down.
• Start at the lowest temperature till you find the
appropriate temperature for you hair.
• Use the HIGH temperature for thick and difficult hair.
• The styler is excellent for natural hairs. Do not use on
artificial hair pieces or wigs as these may melt in the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ct6350

Table des Matières