Table des Matières
Publicité
NTSC/PAL Selector
*1
Cleaning Mode
Touch Operation
Touch Pad (vertical)
Touch Pad Area Set.
Demo Mode
TC/UB Settings
Remote Ctrl
HDMI Settings
4K Output Sel.
USB Connection
USB LUN Setting
USB Power Supply
PC Remote Settings
Language
Changes the TV format of the device so that
you can shoot in a different movie format.
Starts the cleaning mode to clean the image
sensor.
Sets whether or not to activate the touch
operation of the monitor.
Sets whether to operate the camera using the
touch pad when you use the viewfinder in the
vertical position.
Sets the area to be used in the touch
pad operation at the time of shooting by
viewfinder.
Sets demonstration playback of movies to on
or off.
Sets the time code (TC) and user bit (UB).
* This function is for skilled movie creators.
Sets whether to use the infrared remote
control.
Sets the HDMI settings.
Sets how to record and output 4K movies via
HDMI when the camera is connected to an
external recorder/player that supports 4K.
Sets the USB connection method.
Enhances compatibility by limiting the
functions of USB connection. Set to [Multi]
in normal conditions and to [Single] only
when the connection between the camera
and a computer or AV component cannot be
established.
Sets whether to supply power via USB
connection when the camera is connected to
a computer or USB device using a micro USB
cable. If you use the supplied AC Adaptor,
power will be supplied regardless of whether
this setting is on or off.
Controls the PC remote shooting settings.
Selects the language.
GB
GB
41
Publicité
Table des Matières
