Cooktop-Based Hood Control; Resetting The Connection; Controlling The Hood Via The Cooktop; Overview Of The Hood Control Settings - Bosch Nit8060Uc Manuel D'utilisation

¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect®
functions for use and is only required when you want to
use the Home Connect® functions for the first time.
Note: Please note that the Home Connect® functions can
only be used in conjunction with the Home Connect® app.
Information on data protection can be retrieved in the
Home Connect® app.
9 Cooktop-based hood control

Cooktop-based hood control

If both appliances are Home Connect® compatible, the
Cooktop-based hood control
easiest way to connect the appliances is in the
Home Connect® app. To do this, connect the two
appliances to Home Connect® and follow the instructions
in the app.
Notes
¡ If the appliance is being operated by means of the
controls on the cooker hood, this mode of operation
always has priority. It is not possible to use the hood
controls on the cooktop during this time.
¡ You can only connect to the cooker hood via the
Home Connect® app. Other connection routes are no
longer supported.
9.1 Resetting the connection
If you have problems connecting your appliance to your
home network (Wi-Fi) or if you want to log your appliance
onto a different home network (Wi-Fi) , you can reset the
Home Connect® settings.
Note: If you reset the Home Connect® settings, the
connection to any hood will also be terminated.
Turn on the cooktop.
1.
Press and hold kitchen timer for 4 seconds.
2.
a The product information is displayed.
Press kitchen timer repeatedly until
3.
displayed alternately.
9.3 Overview of the hood control settings
You can adjust the cooktop based hood controls to suit your requirements at any time.
Note: The settings will only be displayed if the appliance is connected to a hood. Some of these settings may not be
available.
Setting Values
- Not connected
¡
- Start connection process
¡
- Connected to home network
¡
(Wi-Fi)
- Connected to hood
¡
1 Factory setting (may vary according to model)
and are
Description
1
/disconnect Connection between cooktop and hood
Cooktop-based hood control en-us
Set the settings value to
4.
9.2 Controlling the hood via the cooktop
In the basic settings menu, you can configure what the
hood should do when the cooktop or individual cooking
zones are switched on or off.
You can select other settings using the control panel.
Setting the fan
Touch hood control.
1.
Select the fan level.
2.
You can choose between the levels 1, 2 and 3. To
select the levels Boost and PowerBoost, press 4 or 5 in
the settings area, or press speed boost repeatedly until
the required intensive level is set.
Turning off the fan
Touch kitchen timer.
1.
Select fan setting ⁠ .
2.
Setting automatic mode
Touch hood control repeatedly until
▶
a Depending on the configuration of the hood sensor, the
fan will start automatically when steam is produced.
Refer to the operating instructions of your hood.
Deactivating automatic mode
Touch hood control repeatedly until
▶
Select a different fan setting.
Setting the hood lighting
You can switch the hood light on and off via the control
panel of the cooktop.
Press hood light.
▶
Note: Depending on the basic settings you have selected,
the light will automatically be switched on or off when the
cooktop is switched on or off.
in the settings area.
lights up.
goes out or
23