I-Tech MAG700 Mode D'emploi page 26

Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
MAG 700 is intended for use in the electromagnetic environment specified below. The
customer or the user of MAG 700 should assure that is used in such environment.
Immunity test
Electrostatic
discharge (ESD)
EN 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Impulses
EN 61000-4-5
I.A.C.E.R. Srl
Class A
Complies
Complies
Electromagnetic immunity
Test level EN
60601-1-2
 6kV contact
 8kV air
± 2kV for power
supply lines
1kV
differential
mode
26
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
The MAG 700 is suitable for use in all
establishments, other than domestic
establishments
connected to the public low voltage
power supply network that supplies
buildings used for domestic purposes
Compliance level
 6kV contact
 8kV air
± 2kV per power
supply lines
1kV
differential
mode
MNPG70-04 11/09/2015
and those directly
Electromagnetic
–
environment
guidance
Floors should be
wood, concrete or
ceramic tile. If floor
are covered with
synthetic material,
the relative humidity
should be at least
30%
Mains power quality
should be at that of
a typical commercial
or hospital
environment.
Mains power quality
should be at that of
a typical commercial
or hospital
environment.