Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
eLoop | Installation and user manual
3. Installation
eLoop is a ready-to-use system, all you have to
do is place it at the right distance between you
and the person you are speaking to.
It is also possible to screw the fixing slot of the
eLoop, onto your furniture thanks to two
dedicated place. This solution is recommended
for a single spot usage. To take the eLoop out
from its slop, just slide it gently frontward.
4. Putting eLoop into service
To turn on e-LOOP, please press the button
the back of the product.
4.1. Battery
To access the eLoop's battery, slide the cover at
the back of the product. It is necessary to prime
the battery to use eLoop. To do so, it must be
plugged in: connect the power supply to the
socket indicated by the pictogram
4.2. Microphone jack for OP-M80
Available as an option, the OP-M80 microphone
captures the sound emitted by the agent's voice
and transmits it directly to the hard of hearing
people's hearing aid or to the eLoop's integrated
earpiece if the hard of hearing people do not
have an hearing aid.
To use the OP-M80, plug the microphone jack
into the socket marked with the pictogram
To adjust the microphone level, turn the
potentiometer indicated by the pictogram
4.3. Handset jack plug for OP-E3
Available as an option, the OP-E3 earpiece
allows hard of hearing people without hearing
aids to receive the sound emitted. To benefit
from its use, the user must simply pick up the
earphone from its support and place it on his
ear.
To use this system, simply plug the earphone
jack into the socket indicated by the pictogram
.
To adjust the volume of the earpiece, please
at
turn the potentiometer indicated by the
pictogram
4.4. Putting the eLoop out of service
To turn off eLoop, please press the button
the back of the product.
4.5. Recharging the battery
.
eLoop can work with its integrated rechargeable
battery or with a power supply. The eLoop's
battery holds an autonomy of 10 hours and
recharges completely after 4 hours of charging.
To charge eLoop, plug the power supply into the
socket indicated by the pictogram
LEDs at the back of the product indicate when
the battery is low
.
4.6 Regulations
For an optimal use and to comply with the
.
regulations in force, it is necessary to indicate
the presence of a solution for the hearing
impaired by sticking on the stickers provided.
.
or charging
21
at
.
.
Publicité
Chapitres
Table des Matières
