Hitachi CH 10DL Instructions De Sécurité Et Mode D'emploi page 13

Lock Off button (Fig. 6)
1 Press the Lock Off button
Fig. 6
WARNING:
Never lock the Lock Off button in depressed
position.
Pulling back the switch would then cause the tool
to suddenly start operating, which could result in
injury.
The tool will not start unless the Lock Off button is
pressed while the switch is pulled back.
The Lock Off button can be engaged by pressing it
either from the right or left.
When the switch is released, the Lock Off button
automatically disengages to prevent inadvertent
motor startup.
Blade case (Fig. 7) (Standard accessory with
CH10DL (CG), CH10DL)
When the shrub shear blade is to be attached to or
removed from the tool, or when the shear is not
used, place the blade in the blade case to prevent
injury.
Blade case
Remove
Attach
Fig. 7
Blade cover (Fig. 8) (Standard accessory with
CH10DL (CG), CH10DL)
When the grass shear blade is to be attached to or
removed from the tool, or when the shear is not
used, place the blade in the blade cover to prevent
injury.
2 Slide the switch
Blade
Attach
Blade cover
Fig. 8
Blade box (Fig. 9) (Standard accessory with
CH10DL (CG))
Place the shrub shear blade and the grass shear
blade in the blade box when they are not used.
Also place the crank cam in the blade box to
prevent losing it.
Blade box
Fig. 9
WARNING:
Be sure to turn the tool off and remove the battery
from the tool before attaching and removing the
blade case or blade cover.
CAUTION:
To prevent injury, take care when placing the blade
in the blade case, blade cover or blade box.
Adjuster (Standard accessory with CH10DL (CG),
CH10DL)
WARNING:
Be sure to turn the saw off and remove the battery
from the tool before attaching and removing the
adjuster.
CAUTION:
Be sure to place the blade in the blade case before
attaching and removing the adjuster to prevent
injury by the blade coming into contact with your
hands or face.
English
Blade
Close
Crank cam
13