VICTORIA-M PREMIUM RAFFROLLO Guide page 5

P R E M I U M R A F F R O L LO N A C H M A
EN
First, measure the clear width and height of the wall opening. To obtain the order
height, add the package height of the desired roller model to the measured value.
The corresponding package heights can be found in the model descriptions at the
end of this page.
To determine the order width, measure the clear width of the window opening and add at least 40 mm on each side (fabric overhang).
Example:
You have determined a clear height of 1200 mm and a clear width of 950 mm, and you want to install a Roman blind Model 2.
For the order height, add the clear height with 8% of the total height and an additional 10 cm:
Order height = 1200 mm + 96 mm (package height = 8% of 1200 mm) + 100 mm = 1396 mm
For the order width, add at least 40 mm fabric overhang to the clear width on both sides:
Order width = 950 mm + 2 x 40 mm (fabric overhang) = 1030 mm
M O DEL L E
Model 1:
Roller blind with vertical bands.
Package height:
5% of total height + 5 cm
5
ß
+ Overhang as
desired (Recommen-
dation: Min. 40 mm)
Model 2:
Roller blind with elliptical crossbars.
Package height:
8% of total height + 10 cm
+ Package height
(according to model - see model description below)
clear width
clear width
Model 3:
Roller blind with round crossbars
at the back.
Package height:
7% of total height + 7 cm
+ 49 8178 - 932 932 |
+ Overhang as
desired (Recommen-
dation: Min. 40 mm)
Model 4:
Roller blind with round crossbars
at the front.
Package height:
7% of total height + 7 cm
www.victoria-m.de | info@victoria-m.de