Characteristic Curves - Festo DMSP Série Notice D'utilisation

DMSP−... / MAS−...
13

Characteristic curves

Permitted force F [N] as a factor of contraction h [% of rated length]
(rated length = visible range of unstressed contractible membrane)
Please note
The actual value of the force as a factor of the contraction can vary according to
the product properties. These are e.g. material properties, manufacturing
fluctuations and the rated length. There may therefore be a deviation of the
theoretical force by up to ten per cent. The deviation can be compensated if the
pressure is adapted up to the maximum permitted operating pressure.
1 Force limitation with MAS−10−...−K
2 Max. operating pressure
3 Max. deforming
4 Max. projection
Fig. 17
Festo DMSP−... / MAS−... 0501c − English
DMSP−10−...
MAS−10−...
h [%]
Permitted work range for DMSP/MAS−10−...
(see note above)
Ï Ï
Permitted work range for MAS−10−...−K
0 bar
1 bar
2 bar
3 bar
4 bar
5 bar
6 bar
7 bar
8 bar
25