Alcad ACO-000 Instructions D'installation page 21

ENTRANCE PANEL
Launch the "VideoPorteroPC" application on your computer
by clicking on the
Note:
by selecting the file " VideoPorteroPC" located in Start >
Programs > ALCAD > VideoPorteroPC.
Adjust the volume level of the entrance panel and of the PC
interface (1).
Note: If a more precise adjustment is necessary, remove the
J2 jumper (2) and repeat the adjustment (1).
VIDEODOOR ENTRY SYSTEMS
in the lower Windows bar.
, launch the application
Press the "Auto Switch-on" button (1). Then press the "Replace
receiver-Answer" button (2) to establish communication with
the entrance panel.
Adjust the viewing angle of the video unit until you obtain the
desired effect.