Table des Matières
Publicité
Remove the protecting plugs and the
fixing pins from the flush-mounted box.
Choose the two fixing pins you want
to hinge the panel on to, so that it
opens either to the right or to the left
or downwards.
Place the rings of the panel over the
extracted fixing pins. The unused pins
should be placed in their slots.
Separate the upper and lower
decorative fittings, by loosening the
clamping screws.
VIDEODOOR ENTRY SYSTEMS
Once it has been connected up, close
the panel, press it against the flush-
mounted box and fix it to this using the
clamping screws.
Tighten the upper and lower decorative
fittings.
Publicité
Table des Matières
