Location Of Model Number; Oven Specifications; Electrical Rating; Electrical Requirements - LG LMV2055 Série Manuel De L'utilisateur

Please read this owner's manual. It will tell you how
to use all the fine features of this microwave oven.

LOCATION OF MODEL NUMBER

To request service information or replacement parts,
the service center will require the complete model
number of your microwave oven. The number is on the
oven front as shown in the illustration below.
MODEL NUMBER LABEL

OVEN SPECIFICATIONS

Output Power 1,000W (IEC 60705 Standard)
29 7/8" X 16 7/16" X 15 13/16"
Outer Dimensions
Cavity Volume 2.0 Cu.ft
60.9 lbs.
Net Weight

ELECTRICAL RATING

* Electrical Rating of the Oven:120V AC 60Hz
* 13 Amps / 1500 Watts ( MWO + Cooktop Lamp
+ Ventilation Fan)

ELECTRICAL REQUIREMENTS

The oven is designed to operate on a Standard
120V/60Hz household outlet. Be sure the circuit is at
least 15A or 20A and the microwave oven is the only
appliance on the circuit. It is not designed for 50Hz
or any circuit other than a 120V/60Hz circuit.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If an electrical
short circuit occurs, grounding reduces the risk of
electric shock by providing an escape wire for the
electric current. The appliance is equipped with a cord
having a grounded wire with a grounded plug.
Put the plug into an outlet that is properly installed and
grounded.
WARNING -
plug improperly, you risk electric shock.
Ask a qualified electrician if you do not understand the
grounding instructions or if you wonder whether the
appliance is properly grounded.
Because this appliance fits under the cabinet, it has a
short power-supply cord. See the separate Installation
Instructions for directions on placing the cord properly.
Keep the electrical power cord dry and do not pinch or
crush it in any way.
If it is necessary to use an extension cord, use only a
3-wire extension cord that has a 3-blade grounding
plug, and a 3-slot receptacle that will accept the plug
on the appliance. The marked rating of the extension
cord shall be equal to or greater than the electrical
rating of the appliance.
For a permanently connected appliance:
This appliance must be connected to a grounded,
metallic, permanent wiring system, or an equipment
grounding conductor should be run with the circuit
conductors and connected to the equipment grounding
terminal or lead on the appliance.
5
If you use the grounding