Cleaning Grease Filters Manually; Fitting Grease Filters; Troubleshooting - Junker JD36AL51 Manuel D'utilisation Et Notice D'installation

ATTENTION!
The grease filters may become damaged if they are
squeezed.
Do not squeeze the grease filters.
▶
Note: When cleaning the grease filter in the dish-
washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 20
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 20
Place the grease filters loosely into the dishwasher.
2.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
Start the dishwasher.
3.
Select a temperature of no more than 70 °C.
Allow the grease filters to drain.
4.
8 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
8.1 Malfunctions
Fault
The appliance is not
working.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
7.5 Cleaning grease filters manually
The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
Clean the grease filters roughly every 2 months.
▶
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 20
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 20
Soak the grease filter in hot soapy water.
2.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
Use a brush to clean the grease filters.
3.
Rinse the grease filters thoroughly.
4.
Allow the grease filters to drain.
5.
7.6 Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
▶
Fit the grease filters.
1.
Fold the grease filters upwards and engage the
2.
locks.
Make sure that the locks engage.
3.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
Troubleshooting en
21