User Information; Intended Use - HellermannTyton SpotClip-III Manuel D'utilisation

User information

Operating Instructions
1 User information
These operating instructions only apply for the product
SpotClip-III and are intended for the user. These operating
instructions must be read carefully and understood by all
persons before commissioning the product.
On the fold-out page of the operating instructions, you will find
figures providing an overview and for the assembly of the
product, along with contact details for your local
HellermannTyton country representative.
1.1

Intended use

SpotClip-III downlight covers ensure a safety distance between
the light, damp-proof foil or vapour barrier and the insulation
wool. The product reduces the risk of overheating and the risk
of fire. It also increases the service life of the lights. The
SpotClip-III can also be retrofitted in existing buildings.
Furthermore, the product design with a fixed straight leg
enables the use of lights with an external power supply. The
fixed straight leg can be removed if it is not required. The
product is made of self-extinguishing, heat-stabilised polyamide.
The product is designed for the installation of lights in dry wall
and acoustic construction. The SpotClip-III is suitable both for
use in panels and in plasterboards. The product may only be
used for the purposes described in these operating instructions.
The product may only be used in technically perfect condition in
accordance with its intended use and the operating instructions,
and only by safety-conscious persons who are fully aware of the
risks involved.
Operating Instructions • SpotClip-III • 07-2015
3