2.2
Limitations of use
f Observe the following requirements for the operational
environment:
•
Can be used for LED and fluorescent lights
•
Halogen lights up to 50 Watt
•
Starting at IP protection class IP40, the transformer installed
under the SpotClip-III must be capable of withstanding a
constant temperature of at least 90 °C
•
Can be used for ceiling cut-outs with diameters from 62 mm to
120 mm
•
The diameter of the ceiling cut-out must be 4 mm larger than
required for the spotlight to be able to install the product
•
The available inner usable height is of 115 mm for a ceiling
cut-out of 65 mm
3 User obligations
The user must observe and comply with the respectively
applicable national legal regulations and accident prevention
regulations. The use of the SpotClip-III does not exempt the
user from complying with the installation instructions from the
recessed light manufacturer. Please contact a specialist if you
have any questions.
4 Transport and storage
Do not pile up heavy objects on the packaged product.
Operating Instructions • SpotClip-III • 07-2015
User obligations
5