Customer Service And Spare Parts; Safety Instructions; Representation And Layout Of Warning Instructions - HellermannTyton SpotClip-III Manuel D'utilisation

Safety instructions

1.2 Fire protection properties/standards
The product is self extinguishing and its fire protection
properties comply with UL94 V2. The product is tested
according to the filament test (GWT) at 960 °C as well as
standards EN 60598-1 and EN 60598-2-2. The used insulating
materials and damp-proof foils or vapour barriers of low
flammability comply with DIN EN 13501-1 A2 s1 d0 and
DIN 4102-1 A2. Use only insulating materials and damp-proof
foils or vapour barriers, which do not emit smoke in the case of
fire and do not drip.
1.3

Customer service and spare parts

If you have any questions or suggestions, please contact
the HellermannTyton in your country. The contact data is listed
in the fold-out page of these operating instructions.
2 Safety instructions
The product was manufactured according to the current state
of technology and the recognised safety regulations.
Nonetheless, improper use of the product can result in hazards
to the life and limb of the user or third parties, or in damage to
the product and other material property.
These operating instructions contain information on safety.
f Always follow all of the instructions to prevent personal injury,
material damage or environmental damage.
2.1

Representation and layout of warning instructions

The warning instructions relate to actions and are structured as
follows:
WARNING
Type and source of danger!
Explanations on the type and source of danger.
f
Measures to prevent danger.
A warning indicates possible risk of lethal or serious injuries.
4
Operating Instructions • SpotClip-III • 07-2015