User Information; Intended Use - HellermannTyton SpotClip-Kit Manuel D'utilisation

User information

Operating Instructions
1 User information
These operating instructions only apply for the product
SpotClip-Kit and are intended for the user. These operating
instructions must be read carefully and understood by all
persons before commissioning the product.
On the fold-out page of the operating instructions, you will find
figures providing an overview and for the assembly of the
product, along with contact details for your local
HellermannTyton country representative.
1.1

Intended use

SpotClip-Kit industrial downlight covers ensure a safe distance
between the light, damp-proof foil or vapour barrier and the
insulation wool. The SpotClip-Kit keeps the insulation material
above the downlight at a safe distance and therefore enables
sufficient air cirulation for correct operation. The product
reduces the risk of overheating and the risk of fire. It also
increases the service life of the lights. The SpotClip-Kit can also
be retrofitted in existing buildings. The product is made of
self-extinguishing, heat-stabilised Polyamide. The product is
designed for the installation of large lights in dry wall and
acoustic construction for industrial and office buildings. The
SpotClip-Kit is available in two different sizes. The product is
suitable for use in both, panels and plasterboards. The product
may only be used for the purposes described in these operating
instructions. The product may only be used in technically perfect
condition in accordance with its intended use and the operating
instructions, and only by competent persons who are fully
aware of the risks involved.
Operating instructions • SpotClip-Kit • 11-2015
3