Intended Use; Operation - ELV Electronik ETH comfort Mode D'emploi

1. Intended use

The USB programming stick is used to program system
components such as radio energy-saving controllers.
The USB stick does not have any controls and must be
used in conjunction with the associated PC software.
The device may only be operated indoors and must be
protected from the effects of damp and dust, as well as
solar or heat radiation.
Using the device for any purpose other than that described
in this operating manual does not fall within the scope of
intended use and shall invalidate any warranty and exempt
eQ-3 from any liability. This also applies to any conversion
or modification work.
The device is intended for private use only.

2. Operation

Programming settings are made using the associated
PC software. For more information see Section 3, "PC
software".
The PC software uses the USB programming stick to
send the weekly programme, along with the date and
time, to devices that are ready to receive. For more
information see Section 4, "Radio transmission of
programming settings".
11