Technical Specifications; Technical Assistance - Guarantee - Extel MN IRON 2 Guide D'installation Et D'utilisation

"Voice Volume": Voice Volume
•ID configuration:
To access the ID configurations, select "ID" and press
You can set the address of your monitor by pressing the
, (chap 5e)

7. TECHNICAL SPECIFICATIONS

MN IRON 2
• Reference: 720265Y
• Power supply : 17 V
• Power consumption : 6W
• Screen 7" (18cm)
• Resolution 1440 x 234 points
• Measurements (mm): 220 x 11.5

8. TECHNICAL ASSISTANCE - GUARANTEE

Anomaly
• The monitor does not
turn on
• Bad image and/or bad
sound
• Does not stop ringing
• Image is too bright
• Monitor or second
outdoor station not
working
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69 (0,337€ttc/min)
Last version of the dowloadable manual in color on :
Possible Cause
• The monitor is not con-
nected to a power source
• Environment
• Wiring
• Camera position
• Switch setting
• No system reset.
CFI EXTEL MN IRON 2 - V1 - 01/2013
.
and keys, confirm your settings by pressing
Solution
• Check the polarity of the + and – wires
• Reattach the connectors
• Check that the wires used are the correct size
and that the connection wires of the videophone
are not in the same sheath as the 230V.
• Check the position of the SW1 switches p4
• Check that the connection wires are not
reversed.
• Do not expose the lens of the camera directly to
sunlight or to a reflective surface.
• Check the Dip switches (p4)
• Disconnect from the power source for 30 sec-
onds.
www.cfi-extel.com
GB5