Listo RCL 170-55meb1 Mode D'emploi page 4

REVERSING THE OPENING
1. Make sure that your refrigerator is unplugged.
2. Prythe hinge coverup andoff, removethe three screwsthat securethe upper hinge
to the door, then remove the hinge.
3. Remove the refrigerator compartment door from the cabinet.
4. Remove the two screws that secure the center hinge.
Refrigerator compartment door
Center hinge
Screws
5. Remove the freezer compartment door.
6. Remove the screws that secure the lower hinge to the right side of the cabinet,
then remove the hinge.
7. Remove the washer and nut that secure the pin shaft to the right hole on the
lower hinge, then remove the shaft
v.l.o
DIRECTION OF THE DOORS
Hinge cover
Screws
Upper hinge
6.
Lower hinge
Screws
Pin shaft
6
8. Insert the pin shaft into the left hole on the lower hinge, then secure the shaft with
the washer and nut.
9. Install the lower hinge on the left side of the cabinet.
10. Removethe screw that securesthe door stop from the bottom right of the freezer
compartment door, then remove the door stop and install to the bottom left side.
Freezer door
II. Install the freezer compartment door.
12. Move the door bushing from the top right side of the freezer door to the top left
side of the door. And move the left hole cover to the right side.
Doorbushing—V
13. Removethe center hinge screw hole plug on the left side of the cabinet, then
install in the screw holes on the right side of the cabinet.
00
14. Install the center hingeto the left sidewith the two screwsyou removedpreviously.
Pin shaft
Door stop
Hole cover
op
Screw hole plug
7 v.l.o