Hazet-Werk 5000 CT Série Mode D'emploi page 32

GB
USA
Design and Function
8. Adjustment / Calibration
Any HAZET torque wrench must be checked and
readjusted regularly. We recommend this after
approximately every 5000 operations, but in any
case at the latest every six months. The interval
between tests depends on the fre quen cy of use.
For this purpose you may use a HAZET torque
tester.
Should no suitable tester with click point
recog nition be available, then you should take
your HAZET torque wrench to your specialist
dealer who will have it checked and adjusted
in the factory. HAZET torque
wrenches and HAZET torque
testers sent back to HAZET are
returned after checking and
any necessary adjustment with
a new test certificate.
32