Care And Cleaning - CHI 13103 Manuel D'utilisation Et D'entretien

Care and Cleaning

1. Unplug and allow iron to cool.
2. To empty water from iron: With iron in a horizontal
position, unlock and open Water Fill Door and pour out
water over a sink until empty.
3. Store iron on the Heel Rest. NOTE: Use the Self-Clean
function following each use of the steam function to
keep the steam vents clear of any mineral buildup. Add
water to the iron. Preheat to highest temperature. Unplug.
Hold the iron over a sink. Press and hold the Self-Clean
Button until steam no longer comes from the vents on the
soleplate. Allow iron to cool before storing.
Soleplate Care
The Self-Clean function cleans the steam holes, but will not
remove residue from the flat surface of the soleplate. To clean
an iron's soleplate, preheat the iron to the linen setting and
iron over a damp, 100% cotton cloth. This creates heavy
steam that transfers residue from the soleplate to the cloth.
NOTES:
• Care should be used while cleaning; steam can burn.
• Never iron over zippers, pins, metal rivets, or snaps since
these may scratch the soleplate.
• Do not use abrasive cleansers or metal scouring pads.
• Do not use hot iron cleaner on the soleplate.
12