Brinkmann Portland Notice D'utilisation page 31

Warming Rack
Cooking Grills
Heat Distribution
Plates
Grooves
Electronic
Igniter Button
Battery
Step 22
Place the heat distribution plates
on lower level of grill body
assembly directly above burners.
Step 23
Place cooking grills on support
ribs directly above heat
distribution plates.
Step 24
Place warming rack in grooves so
that it sits above the cooking grills.
Step 25
Remove igniter cap and insert
battery with position end of battery
toward igniter cap. Ensure spring is
in place inside igniter cap. Replace
igniter cap and make sure the
igniter is working properly.
30