Hitachi SV 12SH Instructions De Sécurité Et Mode D'emploi page 11

6. Installing the sanding paper
(1) Match the holes in the sanding paper (Velcro type) to the holes in the pad (Base)
(velcro type). (Fig. 2, 3)
Pad (Base)
Sanding paper
(Velcro type)
Fig. 2
(2) Surely attach the sanding paper (Velcro
type) by strongly and evenly pressing with
your palm. (Fig. 4, 5)
Press
strongly
7. Attaching and removing the dust bag
(1) Attaching the dust bag
As shown in Fig. 6, hold the dust gate and
push it in the direction of arrow A to attach
it to the dust outlet.
(2) Removing the dust bag
As shown in Fig. 6, hold the dust gate and
pull it in the direction of arrow B to remove
it from the dust outlet.
Fig. 4
Sanding paper
(Velcro type)
Press strongly
A
Dust outlet
English
Pad (Base)
Fig. 3
Fig. 5
Dust bag
B
Dust gate
Fig. 6
11