Operation; Inserting/Removing The Battery Pack; Selecting The Speed Level; Setting The Rotational Direction - Parkside Performance Pdssap 20-Li D3 Mode D'emploi

˜ Operation
˜ Inserting/removing the
battery pack
WARNING! Risk of injury due to
m
i i
Only insert the battery pack
u
the product is fully prepared for use.
NOTICE! Risk of property damage
m
and damage to the product!
An incorrect battery pack can
u
damage the product and the battery
pack.
Inserting the battery pack
1. Push the battery pack
guide into the battery pack holder
2. Ensure the battery pack
audibly in place.
Removing the battery pack
1. Press the release button
battery pack
.
[ 7 ]
2. Pull the battery pack
battery pack holder
˜ Selecting the speed level
Press [ ] to choose between
o
speed levels.
The selected speed level is indicated
o
on the speed level display
Level Max.
‑
rotation
speed
1
1,900 min
1
1
2,400 min
2
3
1
3,050 min
1
3,600 min
4
‑
once
[ 7 ]
along the
[ 7 ]
[ 6 ]
clicks
[ 7 ]
[ ] on the
out of the
7 ] [
.
[ 6 ]
.
[ ]
T
Max.
impact
rate
120 N m
1
1,200 min
150 N m
1
2,400 min
190 N m
1
3,800 min
22 N m
1
4,300 min
˜ Setting the rotational
direction
Fig. E
NOTICE! Risk of product damage!
m
Only operate the rotational direction
u
switch
[ 3 ]
stopped.
NOTE
The directional information in this
u
section should be interpreted as
meaning that the user is positioned
behind the product.
Set the rotational direction switch
o
to one of the 3 positions
.
Position of the
rotational direction
i
3 ] [
Left
Middle
Right
˜ S i i
WARNING! Risk of injury due
m
to unintentional continuous
operation of the product!
Before inserting the battery pack
u
check that the on/o switch
works properly and returns to the
OFF position when released.
Switching on
1. Insert the battery pack

Inserting/removing the battery pack .

2. Set the rotational direction (see

Setting the rotational direction .

when the product has
Rotational
direction
Clockwise
On/o switch
locked
Counter-
clockwise
[
(see
7 ] [
GB/IE
3 ] [
[ ]
,
7 ] [
]
39