BEROTEC MOFESSOR Manuel D'utilisation page 15

T e m p e r a t u r e i n f l u e n c e
The common range of use of a two-wheeler is between -10°C and +50°C. Within this tempe-
rature window the viscosity of the oil changes 60 times. In order to ensure uniform lubrica-
tion of the chain, the current outside temperature is measured in the control unit and the
oil flow is automatically adjusted. An adjustment of the oil used is not necessary.
O i l
We recommend to use the oil specially provided and tested by BEROTEC. In principle,
the use of other oils is possible. So-called „organic oils" or salad oils should be avoided.
These have a tendency to resinify and can clog the system, especially if it is left standing
for a long time. Solvent-containing substances and water must not be added.
Viscosity recommendation:
Viscosity /40°C / ASTM D 7042 : 100 mm²/s
Viscosity index / ASTM D 2270 : 135
Installation
P r e p a r a t i o n s
Specific installation instructions are available for many vehicle models.
Visit our website for more information:
w w w. b e r o t e c . d e /p r o d u c t /c h a i n - o i l e r/ ? l a n g = e n
I n s t a l l a t i o n l o c a t i o n
Ensure that no part of the system is installed near hot components such as the exhaust or
engine casing. Under the pillion seat there is often enough storage space for installation.
For an overview of the construction of the system, please refer to page 13.
English
15