BEROTEC MOFESSOR Manuel D'utilisation page 14

B E R O T E C
F u n c t i o n
» Switch on ignition
LED flashes up (self-test) → Chain oiler active
» Start of chain lubrication
First oil delivery after time interval - Level 1 = 7 min / Level 9 = 1,5 min
» Continuous and automatic lubrication
Dosing valve opens and closes automatically - Oil quantity/opening time is adjusted
to the ambient temperature - LED lights up with each lubrication impulse
» Switch off ignition
Chain oiler deactivated - No dripping while standing - No power consumption
R a i n / O f f r o a d
The oil application can be increased via an integrated rain control. By operating the rain
switch, the oil application is increased to 10 times the normal amount (LED in the switch
lights up red). The rain mode is reset by switching off the ignition or by pressing the key
again.
F l u s h i n g
To flush the system, the rain switch must be pressed for 4 seconds. The red LED starts
flashing quickly as a feedback. This mode opens the dosing valve permanently and can
be useful in the following situations:
» Bleeding the system
» Re-oiling a dry chain within a short time
» After a long journey in heavy rain or very dusty conditions, restore the oil film
Attention: This mode leads to a very high oil release!
14
MOFESSOR
English