Technical Informations - ARDES AR4P04R Mode D'emploi

(pag.2)
1 - Outlet grid
2 - Display
3 - Base
4 - Dust filter
5 - Hooks
Technical data indicated on the appliance.
Batteries
The remote control is supplied with CR2025 3V batteries; remove the
protective plastic from the battery compartment of the remote control
before use.
When the battery has run out, it must be replaced with another one of
the same type.
To remove the battery, refer to the diagram shown on the back of the
remote control:
Description of controls:
Make sure that the function switch (6) is in the OFF position "0" before
connecting or disconnecting the apparatus.
To turn the appliance on, insert the plug in the power outlet, set the main
switch (6) to "I".
For your convenience the unit can be operated by using control panel in
the main body or using remote control included.
"On/Off" button
- When the device is switched off, press this button to turn it on. The
device switches on in summer ventilation mode (indicator "Fan" on).
The indicator light (9) will switch on and the display (2) shows the room
temperature.
- When the device is switched on, press this button to turn it off.
Wait 30 seconds until the fan will stop; then switch off the appliance
by setting the main switch (6) to "0".

Technical informations

Instructions for use
6 - Main switch
7 - Indicator light: "TIMER"
8 - Indicator light: "SWING"
9 - Indicator light: "ON"
GB
GB
15