Washing Clothes; Signal Function - Proline Fp8140Wh Manuel D'utilisation

Washing Clothes
1.0pen the door to load the articles
DO NOT OVERLOAD the appliance
Please refer to the chart below to determine
laundry you are washing.
2.Close the door.
3.Put the detergent and, if required,
4.Turn the water supply
5.Turn the programme
6.Press and the appliance
7.When the cycle is finished,
8.0pen the door and remove

Signal function

You can use this function
programme selection
Press and hold
indicate the signal function
again for about
into the drum.
or your laundry
Fabric Type Load Capacity
Cotton
Synthetic
softener
on.
selection knob to select the desired
will begin the cycle.
the appliance will sound.
the laundry.
to turn on or off the sound made when pressing
knob.
for about 3 seconds until a beep is heard
is activated.To deactivate
3 seconds until a beep is heard.
may not be washed
the load capacity for the type of
or pre-wash detergent,
programme.
this function,
36
properly.
in the appropriate compartments.
the buttons or turning
press and hold
the